Supermicro 6048R-DE2CR24L, User Manual, Page: 57 / 126

Chapter 5: Advanced Serverboard Setup
5-11
X10DRS Quick Reference
Jumper Description Default Setting
JBT1 Clear CMOS See Section 5-8
JPB1 BMC Enable/Disable Pins 1-2 (Enabled)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPL1 10G(T) LAN1/2 Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable/Disable Open (Disabled)
JPX1 PCI-E Switch (PLX) Enable/Disable Pins 1-2 (Enabled)
Connectors Description
External SAS SAS 3.0 port (AOM-S3008-L8-SB required for SAS support)
FAN1-8 System/CPU Fan Headers
JIPMB1 4-pin External BMC I 2 C Header (for an IPMI card)
JKVM1 VGA/COM1/USB 0/1 (2.0) Connector
JPWR1 4-pin Power Header
JSD1/JSD2 SATA DOM (Device on Module) Power Connectors
JSLOT1 Slot1 PCI-E CPI-E 3.0 x24 (x8 + x16) (CPU1 Port2 + CPU2 Port3)
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
LAN1/2 10G(T) LAN Ethernet Ports 1/2
PM1/PM2 System Power Connectors
S-SATA 0/1 SATA 3.0 Connectors (supported by Intel SCU)
SAS Mezzanine
Header
SMC-proprietary PCI-E 3.0 x8 Mezzanine Slot w/SAS Support
USB1/2 USB 2.0 Ports (JKVM1)
USB3 USB 3.0 Header
LED Description State Status
HDD_LED1 (PCH) HDD Activity LED Green: Blinking (PCH) HDD Active
HDD_LED2 (SAS) HDD Activity LED Green: Blinking (SAS) HDD Active
LEDH (Upper) BMC Heartbeat LED Green: Blinking BMC Normal
LEDL (Lower) System Heartbeat LED Green: Blinking System/Power Normal
LEDSOV1 SAS Overheat LED Red SAS Overheating