www.SuperiorFireplaces.US.com
127038-01A
14
Figure 24 - Installing Front Top Log
INSTALLATION
Continued
Figure 25 - Installing Back Top Log and Final Assembly
Figure 25A - Installing Back Top Log, Top View
Front Top Log
(D-024)
Rectangular
Peg
Right Split
Crossover
Log (D-022)
Middle Split Log
Right Split
Crossover
Log (D-022)
Back Top Log (D-062,
D-023 or D029)
Figure 22A - Installing Middle Split Log Rear Top Side
View
Figure 23 - Installing Right Split Crossover Log
Log Notch
Burner Tube
7. Find the front top log (D-024). See Figure 24. The left end
of this log has a square hole that fits over a square peg that
is on the top of the middle split log. The right end of this log
rests behind the knot on the top of the front right log.
8. Find the back top log (VFGT24 inch models: D-062 or
VFGT30 inch models: D-023 or VTGF36 inch models:
D-029).See Figures 25, and 25A. The left end of this log
has a round hole that fits over the round peg that is on
the top of the back left log. The right end of this log has a
rectangular hole that fits over the rectangular peg on the
top of the right crossover log.
Place lava rock around the base of the burner assembly on
the fireplace floor to simulate an ash bed. Do not place lava
rock or any other material on the burner.
6. Find the right split crossover log (D-022) The bottom of
the log has a rectangular stand off that fits in the slots on
the right side of the front right log and the middle split log.
Place this log as shown in Figure 23.
Right Split Crossover
Log (D-022)
Right Front Log
Square Peg
LAVA ROCK PLACEMENT
