www.SuperiorFireplaces.US.com
127038-01A
11
INSTALLATION
Continued
Figure 17- Disconnecting Switch from Control Valve
Switch
Control
Valve
Figure 18 - Installing Right Front Log
Figure 18A - Installing Right Front Log, Top View
INSTALLING LOGS AND LAVA ROCK
WARNING: Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifically approved with this
appliance may result in property damage or
personal injury.
CAUTION: After installation and periodically
thereafter, check to ensure that no flame comes
in contact with any log. With appliance set to
Hi, check to see if flames contact any log. If
so, reposition logs according to log installation
instructions in this manual. Flames contacting
logs will create soot.
LOG PLACEMENT
It is very important to install these logs exactly as instructed.
Do not modify logs. Only use logs supplied with appliance.
Note: Each log includes an identifying number cast in the log.
Look at each log when placing them on the burner system to
be certain it is correct.
Note:
For additional information, go to
www.IHP.US.com
and
click on the technical Support tab for access to log placement
videos.
1. Find the right front log (VFGT24 inch models: D-061 or
VFGT30 inch models: D-019 or VFGT36 inch models:
D-027). See Figures 18, 18A, 18B, and 18C for reference.
The log has a rectangular shape on the bottom that fits
against the lip on the black metal base, the square grate,
and the round tube burner. Slide the log in place as shown
in Figures.
Burner
Tube
Grate Finger
Round Tube
Burner
Grate Finger
Right Front Log (D-061,
D-019 or D027)
