www.SuperiorFireplaces.US.com
127038-01A
12
INSTALLATION
Continued
Figure 19 - Installing Back Left Log
Figure 19A - Installing Back Left Log
Figure 19B - Installing Back Left Log (D-018) Rear View
Figure 20 - Installing Front Left Log
Figure 18B - Installing Right Front Log, Top View
Figure 18C - Installing Right Front Log, Side View
Front Left Log (D-059,
D-017 or D025)
Burner Tube
Square Grate
2. Find the back left log (VFGT24 inch models: D-060 or
VFGT30 inch models: D-018 or VFGT36 inch models: D-026).
See Figures 19, 19A, and 19B. Figure 19A shows how the log
must fit against the end of the burner. Figure 19B shows how
the notch in log fits against the vertical portion of the burner
tube. Place this log on the base assembly by inserting it from
the left side as shown in Figure 19. You will need to twist the
log slightly to get it to fit against the burners properly. It will
rest even with the back edge of the pan.
Back Left Log (D-060,
D-018 or D026)
Flat Part of Log
Log Notch
Burner Tube
Burner Tube
Log Notch
Vertical Portion of Burner Tube
3. Find the front left log (VFGT24 inch models: D-059 or
VTGF30 inch models: D-017 or VFGT36 inch models:
D-025). See Figures 20, 20A, and 20B. The log has a
rectangular stand off on the bottom that fits against the lip
on the black metal base as shown in figure 20A, page 13.
The bottom of this log has a slot that fits over the second
bar on the grate as shown in Figure 20B, page 13. Place
the log on the base assembly as shown in figures.
Grate Fingers
