manualshive.com logo in svg

Superior MONIA, Instructions For Installation, Use And Maintenance Manual, Page: 34 / 44

Share
Download
Superior MONIA Instructions For Installation, Use And Maintenance Manual Download Page 34

H07023380 / DT2000477-03

English

Ash from natural (non-treated) wood burned in stoves or open fi replaces is composed mainly of calcium, silicon, potassium and magnesium oxides.
The ashes can therefore be used as a fertiliser for plants or in the garden, albeit not exceeding 2.6 kg per 10m

2

 annually.

6.16  DISPOSAL OF ASHES

DT2010049-04

The ashes should be placed in a metal container with a sealed cover. The sealed container should be placed on a non-combustible 
surface at a safe distance from combustible materials until the cinders have been completely extinguished.
Only when they have been fully extinguished can the ashes be thrown away with organic waste, assuming that nails or other non-
organic material are not present.

The stove is provided with a niche for a humidifi er (optional) located under 
the ceramic insert of the top plate: once the ceramic cladding has been 
fi tted, the humidifi er can be fi lled with water.

6.15  HUMIDIFIER (OPTIONAL)

DT2011671-00

When refi lling the humidifi er do not exceed the maximum 
capacity, shown as max, otherwise the electrical parts of the 
stove could be damaged.

Fig. 48

DT2032301-00

34

Summary of Contents for MONIA













































Reviews:

No comments