Superior MONIA, Instructions For Installation, Use And Maintenance Manual, Page: 26 / 44

H07023380 / DT2000477-03
English
Description of activity Display
Press key 1 or 2 to set the required power level during the fi rst operating cycle.
Confi rm the power setting by pressing the SET key.
SET EN PO 1 (scrolling readout)
Press key 1 or 2 to set the required room temperature during the fi rst operating cycle.
Confi rm the temperature by pressing the SET key.
SET TEMP ROOM 1 (scrolling readout)
Programming automatically passes to the second operating cycle. To continue programming
for the second cycle, proceed in sequence with the steps given for the fi rst cycle. The number
2 appears on the display, indicating the second operating cycle. If you do not want to program
a second cycle, set START and STOP of the second programming cycle to OFF.
START EN PROGRAM 2 (scrolling readout)
6.6 PARAMETERS MENU
DT2011676-00
The User can only interact with the TIME METER STORAGE in the parameter menu, as described in the table below: the other parameters can only be used
by an authorised service centre.
Description of activity
Display
Use key 5 or 6 to scroll the menu that appears on the right display until the scrolling readout
MEMORY COUNTERS appears.
Confi rm by pressing the SET key.
MEMORY COUNTERS
TIME METER STORAGE
DT2011679-00
HOURS TOTAL
The scrolling readout HOURS TOTAL appears on the right display and the total hours of
operation on the left display.
Use key 5 to go back within the time meter storage menu.
Press key 6.
The scrolling readout HOURS PARTIAL appears on the right display and the number of
partial hours on the left display.
Use key 5 to go back within the time meter storage menu.
Press key 6.
Press key 6 for a few seconds. Use key 5 or 6 to scroll the menu that appears on the right
display until the scrolling readout MENU PARAMETERS appears.
Confi rm by pressing the SET key.
MENU PARAMETERS
The scrolling readout NUMBER START appears on the right display and the number of
actual starts on the left display.
Use key 5 to go back within the time meter storage menu.
Press key 6.
The last 5 alarms (e.g.: ALL) appear on the right display and the readout MEM1, MEM2,
MEM3, MEM4, MEM5 on the left display.
Use key 5 to go back within the time meter storage menu.
Press the SET key to return to the initial display.
HOURS PARTIAL
NUMBER START
ALL (scrolling readout)
26