manualshive.com logo in svg

Superior MONIA, Instructions For Installation, Use And Maintenance Manual, Page: 13 / 44

Share
Download
Superior MONIA Instructions For Installation, Use And Maintenance Manual Download Page 13

H07023380 / DT2000477-03

54

6

18

!

8

scarico

18

Dimensioni in cm

48

99

33 *

8,3

27

* Quota minima da rispettare per scarico laterale (optional)

Every product is identifi ed by a rating plate showing the model and the performance of the appliance as well as a plate giving the serial number.
The rating plate is located on the rear panel of the stove, while the plate with the serial number is located on the underside of the hopper lid. 
A label bearing the serial number is also applied on the cover last page of the “Installation, operation and maintenance” booklet.
Always give the information shown on these plates to the dealer or the Service Centre when requesting service or spare parts.

DT2032205-0

NOME

PRODOTTO

DT2032204-0

NUMERO MATRICOLA

English

2.4  PRODUCT IDENTIFICATION DATA

DT2011541-00

2.5  DIMENSIONS

DT2032294-00

Fig. 24

Fig. 25

PRODUCT 
NAME

SERIAL NUMBER

Measurements in cm.
* Minimum measurement for the side flue gas outlet (optional).

13

Summary of Contents for MONIA













































Reviews:

No comments