SPR-MAN-LM
sprtool.com
PAGE 11 OF 16
7. To feed the Y-Axis or Z-Axis, loosen RAIL-CLAMPS and turn HAND-WHEEL.
NOTE: Z-AXIS will drop when loosening RAIL-CLAMPS
8. To power feed the X-Axis, ensure CLUTCH is engaged by snapping it inwards towards the GEAR-BOX.
9. Lock out all the RAIL-CLAMPS in non-feeding axes when cutting material.
Vibrations from cuts which are too deep or too fast can cause the RAIL-CLAMPS to slip.
1. The Linear Mill is similar in operation to any 3-Axis Milling Machine.
2. Before operating ensure all mounting fasteners are secure.
3. Ensure all pneumatic lines are connected correctly.
4. Start-up milling spindle away from job to check for correct rotation.
5. Adjust speed and feed to suit tooling and material.
6. To feed the X-Axis manually, loosen both X-RAIL-CLAMPS (Figure 6) and pull the CLUTCH outwards to
disengage from the GEAR-BOX (Figure 7).
OPERATION
FIGURE 7
