SPR-MAN-LM
sprtool.com
PAGE 12 OF 16
TIPS FOR BEST RESULTS
1. Slower feed on cuts will produce less vibrations and a better surface finish.
2. Conventional milling will produce less vibrations and a better surface finish.
3. Narrower cuts will produce better flatness by minimizing misalignment of cutter tool
4. It is recommended that with the pneumatic mill, a max depth of cut of 0.020” or less will achieve the
best results.
5. Positioning the Linear Mill as close as possible to the material to be cut will produce better surface
finish.
6. Hand-wheels can be placed on either end of the Y and Z-axis feeds.
7. Clear chips while machining (Do Not use your hands to clear chips)
