Superior FVDA18M Installation And Operation Instructions Manual Download Page 2

Superiorfireplaces.US.com

126900-01_B 

2

SAFETY

 WARNING: Improper installation, adjustment, 

alteration, service, or maintenance can cause injury 

or property damage. Refer to this manual for correct 

installation and operational procedures. For assistance 

or additional information consult a qualified installer, 

service agency, or the gas supplier.

This appliance may be installed in an aftermarket,* 

permanently located, manufactured (mobile) home, 

where not prohibited by local codes.
This appliance is only for use with the type of gas 

indicated on the rating plate. This appliance is not 

convertible for use with other gases.

* Aftermarket: Completion of sale, not for purpose of resale, from 
the manufacturer.

 

 WARNING: This product contains chemicals known 

to the State of California to cause cancer or birth de-

fects, or other reproductive harm.

 WARNING: Keep flue open when operating unit.

 DANGER: Carbon monoxide poisoning may lead 

to death!

Carbon Monoxide Poisoning:

 Early signs of carbon monoxide poison-

ing resemble the flu, with headaches, dizziness or nausea. If you have 

these signs, the log set may not be working properly. Get fresh air at 

once! Have log set serviced. Some people are more affected by carbon 

monoxide than others. These include pregnant women, people with 

heart or lung disease or anemia, those under the influence of alcohol 

and those at high altitudes.

Natural & LP Gas:

 Natural & LP gas are odorless. An odor-making 

agent is added to the gas. The odor helps you detect a gas leak. 

However, the odor added to the gas can fade. Gas may be present 

even though no odor exists.
Make certain you read and understand all warnings. Keep this manual 

for reference. It is your guide to safe and proper operation of this 

log set.

 WARNING: Any change to this log set or its controls 

can be dangerous.

 WARNING: Do not use a blower insert, heat exchanger 

insert or other accessory not approved for use with this 

appliance.

 WARNING: This appliance is equipped for either 

natural gas or propane/LP gas but not both. Gas type 

is indicated on the rating plate. Field conversion is 

not permitted.

 WARNING: Do not allow fans to blow directly into 

the fireplace. Avoid any drafts that alter burner flame 

patterns.

 WARNING: Installed decorative glass door enclo-

sures must be fully opened when operating this gas 

appliance.

Safety ............................................................................................. 2

Product Identification ..................................................................... 4

Local Codes ................................................................................... 4

Product Feature .............................................................................. 4

Unpacking ...................................................................................... 4

Requirements for the Commonwealth of Massachusetts ...............4

Installation ..................................................................................... 5

Operation ..................................................................................... 10

Inspecting Burner ........................................................................ 11

Cleaning and Maintenance  .......................................................... 11

Troubleshooting ........................................................................... 12

Service Hints ................................................................................ 15

Technical Service ......................................................................... 15

Replacement Parts ....................................................................... 15

Accessories .................................................................................. 15

Parts ............................................................................................ 16

Warranty ...................................................................................... 19

Thank you for your purchase. We appreciate your 

business!

Please carefully read and follow all instructions in this manual. 

Pay 

special attention to all warnings and safety information.

Following these safety, care, and operation instructions will help 

ensure many years of dependable and enjoyable service from your 

fireplace.

Please read and understand these instructions before installing 

or operating.

TABLE OF CONTENTS

Summary of Contents for FVDA18M





















Reviews: