SuperiorFireplaces.US.com
126737-01_E
13
INSTALLATION
Continued
LOG PLACEMENT FOR MODEL BRT 4042TEN, 4342TEN,
4542TEN, 4042TEP, 4342TEP, 4542TEP
1. Place large back log (log 1) onto grate making sure notches
rest over grate (see Figure 27).
2. Insert lower end of log 2A between first two grate fingers and posi-
tion upper end into notch on front of log 1. See Figure 27. Place log
2B on front right side of grate as shown in Figure 27.
3. Place log 3 into notch on top left of log 1, resting lower end on
left two grate fingers (see Figure 28).
4. Place upper end of log 4 into notch on log 1 as shown in Figure
28. Rest lower end of log 4 on the middle grate finger as shown
in Figure 29.
5. Place upper end of log 5 into notch on top inner right of log 1
(see Figure 29). Rest lower end of log 5 on middle grate finger
as shown in Figure 30.
6. Place log 6 into notch on top right of log 1 (see Figure 29). Rest
lower end of log 6 on top of log 2B (see Figure 30).
As an option to enhance the look of the hearth, you may place lava
rock provided around front and sides of burner pan.
NOTICE: Do not put lava rock inside the burner pan or
around the air mixer fitting. Placing lava rock inside
the burner pan or blocking the openings of the propane/
LP air mixer could cause performance problems.
Figure 27 - Installing Logs 1, 2A and 2B
Log 2A
Log 2B
Log 1
Notch
Figure 28 - Installing Logs 3 and 4
Log 4
Log 3
Log 1
Notches
Figure 29 - Installing Logs 5 and 6
Figure 30 - Logs Installed for BRT4042TEN/TEP, BRT4342TEN/
TEP and BRT4542TEN/TEP Models
Log 6
Log 5
Notch
Log 1
Log 2B
