SuperiorFireplaces.US.com
126737-01_E
12
Figure 23 - Installing Logs 1 and 2
Log 1
Log 2
Notch
Figure 24 - Installing Logs 3 and 4
Log 3
Log 4
Log 2
Log 1
Notches
Figure 25 - Installing Logs 5 and 6
Log 5
Log 6
Log 4
Notch
Notch
Figure 26 - Logs Installed for BRT4036TEN/TEP, BRT4336TEN/
TEP and BRT4536TEN/TEP Models
INSTALLATION
Continued
LOG PLACEMENT FOR MODEL BRT 4036TEN 4336TEN, 4536TEN,
4036TEP, 4336TEP, 4536TEP
1. Place small front right log (log 1) on right front of grate as shown
in Figure 23.
2. Place large back log (log 2) onto grate making sure notches rest
over grate as shown in Figure 23.
3. Place log 3 into notch on log 2, resting front end on top of log 1
(see Figure 24).
4. Place upper end of log 4 into notch on log 2 as shown in Figure
24. Rest lower end of log 4 onto middle grate finger as shown in
Figure 25.
5. Place upper end of log 5 into notch on left of log 2 (see Figure
25). Rest lower end of log 5 on grate as shown in Figure 26.
6. Insert lower end of log 6 between first two grate fingers as
shown in Figure 26 and position upper end of log 6 into notched
area on front of log 2 as shown in Figure 26.
As an option to enhance the look of the hearth, you may place lava
rock provided around front and sides of burner.
NOTICE: Do not put lava rock inside the burner pan or
around the air mixer fitting. Placing lava rock inside
the burner pan or blocking the openings of the propane/
LP air mixer could cause performance problems.
