www.SuperiorFireplaces.US.com
126826-01A
18
INSTALLATION
Continued
Figure 20 - Installing LBG36-SM Model
Control Cover Logs
Left Control
Cover Log
Right Control
Cover Log
Right Small Front Log
Left Small
Front Log
Bracket
Bracket
7. For LTF36-SM, the front right and left
logs are longer and are supported with
brackets on each end (see Figure 20).
Place left and right small front logs
under left bracket and beside right
bracket.
8. For LBG36-SM, position left and right
control cover logs as shown in Figure
21. These may be placed as desired to
hide controls.
LBG(18,24,30)-SM MODELS
LBG36-SM MODELS
Figure 21 - Correct Log Placement
CONCRETE LOG MODELS LBG
(18,24,30) BM
Note: Your appliance may vary from model
shown but log placement will be the same.
1. Place fiber ramp log in center of chassis
as shown in Figure 22. The fiber ramp log
can be identified by the shape and much
lighter weight when compared to the other
logs. The log must sit flat on the black
sheet metal and behind the left metal tab
as shown. Make sure the side marked
''BOTTOM'' is setting down.
2. Place front left (18" D-064, 24" D-057 & 30"
D-038) and front right (18" D-065, 24" D-058
& 30" D-039) logs as shown in Figure 23.
Figure 23 - Installing Left/Right Front Logs
Left Front
Log
Right Front Log
Figure 22 - Installing Fiber Ramp Log
Ramp Log
Metal
Tab