www.SuperiorFireplaces.US.com
126861-01A
16
INSTALLATION
Continued
FINISHING FIREPLACE FOR
INSTALLATION
VRL4543 series fireplace come with the rear
panel semi-installed. If you will be using the
fireplace for a one sided regular application,
you will need to finish the installation of the
rear panel. If you will be upgrading the fire
-
place to a see-thru, the rear panel will need to
be removed (See
Upgrading VRL4543 Series
to See-Thru Application
).
1. Using self-tapping screws provided and
holes on rear panel as a guide, screw
the rear panel to the fireplace as shown
in Figure 16.
INSTALLING HOOD
1. Loosen screws at top of face opening and
slide hood through screws as shown in
Figure 17.
2. Tighten screws securing hood to fireplace.
Figure 16 - Installing Rear Panel for
Regular Applications
Figure 18 - Removing Rear Panel for
See-Thru Applications
Figure 19 - Removing for See-Thru
Applications
UPGRADING VRL4543 TO SEE-THRU
APPLICATION
Removing Rear Panel
1. In the rear of the fireplace, locate screws
at top of rear panel and remove as shown
in Figure 18. Discard screws and rear
panel.
2. Unscrew mount bracket from top face as
shown in Figure 19. Discard mounting
bracket and replace screws.
Figure 17 - Installing Hood
