SuperiorFireplaces.us.com
126817-01F
5
PRODUCT IDENTIFICATION
Figure 1 - Product Identifi cation
Glowing
Embers
Chassis
Control
Knob
Flame
Adjustment
Knob
Left
Side
Right
Side
Front
LOCAL CODES
NOTE
: Do not pick up appliance base assembly
by burners. This could damage the appliance.
Always handle base assembly by grate.
2. Remove all protective packaging applied to logs
and appliance for shipment.
3. Check appliance for any shipping damage. If
appliance is damaged, promptly inform dealer
where you purchased the appliance.
Install and use appliance with care. The installation
must conform with local codes or in the absence
of local codes, to the latest edition of The National
Fuel Gas Code, ANSI Z223.1/NFPA54*.
*Available from:
American National Standards Institute, Inc.
25 West 43rd Street, 4th fl oor
New York, NY 10036
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02169-7471
UNPACKING
1. Remove logs and appliance base assembly
from carton(s).
COMMONWEALTH OF MASSACHUSETTS REQUIREMENTS
These appliances are approved for installation in the US state of Massachusetts if the following ad-
ditional requirements are met:
• Un-vented Room Heaters shall be installed in accordance with 527 CMR 30.
• Installation and repair must be done by a plumber or gas fi tter licensed in the Commonwealth of
Massachusetts.
• The fl exible gas line connector used shall not exceed 36 inches (92 centimeters) in length.
• The individual manual shut-off must be a T-handle type valve.
• Unvented appliances may NOT be installed in bedrooms or bathrooms.
• A working smoke detector must be installed in the area where vent-free appliances are installed.
Seller of unvented propane or natural gas-fi red supplemental room heaters shall provide to each
purchaser a copy of 527 CMR 30 upon sale of the unit.
CAUTION: Do not remove the data
plates from the grate assembly. The
data plates contain important war-
ranty and safety information.
