Operation
900960-00C, 06/2019
Innovative Hearth Products
DRT3500-C Series Direct-Vent Gas Fireplaces
60
Installing the DRT3500-C 40/45 Series Oak Log Set
The logs have notches/tabs to assist proper positioning. Upper logs rest on lower logs via notches/tabs. Proper log placement is
critical to prevent sooting. Place the logs in the gaps between flame peaks, so they do not impinge the flames. Follow the log placement
instructions precisely.
NOTE: Do not cover the burner ports.
Table 31 - Oak Log Set
I.D. No.
Description
1
Left Front Log
2
Middle Log
3
Rear Log
4
Front Right Log
5
Right Log
6
Left Log
Catalog number for the
entire set: See
Page 73
.
Figure 51 - Locate the log placement tabs/points
Figure 52 - Install Left Front Log (1)
Do NOT place embers on or close to large
ports or the pilot area as seen here (circled).
NOTE: Enough glowing ember material is provided for several applications.
For best glowing effect, replace the ember material annually.
Figure H - Place glowing embers (rockwool)
4. Install left frong log on the two left log grate tines (c & d)(
Figure 51 and 52
).
Front View
Bottom View
Fits against grate tines
(c & d, Figure 44)
1
4
2
6
3
5
3
2
5
6
4
1
1. If necessary, remove the glass door (
Pages 63-64
). Locate the placement tabs (
Figure 51
).
2. Bend up the log placement tabs (
Figure 51
).
3. Tear the glowing embers into dime size pieces. Place glowing embers as shown in
Figure 50
.
Grates
Log #1
Grate
Log #2
c
d
e
f
g
BEND UP TABS
a
b
Tabs for
Log #3
1
Grate
Log #4
Grate
Log #5
