Operation
900004-00, 03/2018
Innovative Hearth Products
DRT2000 and DRC2000 Direct-Vent Fireplaces
60
MAINTENANCE SCHEDULE
See the tables below for detailed information about required maintenance, both regular and annual.
Table 38 - Maintenance Performed Annually—Before the Burning Season
Maintenance Task
Performed By
Performed By
Inspecting/Cleaning Burner, Logs
and Controls
Qualified Service Technician
Inspect valve and ensure it is properly
operating. Check piping for leaks. Vacuum
the control compartment, fireplace logs and
burner area.
Checking Flame Patterns and Flame
Height
Qualified Service Technician
Verify the flame pattern and height displayed
by the fireplace (Figures 39 and 40). Flames
must not impinge on the logs.
Inspecting/Cleaning Pilot and Burner
Qualified Service Technician
Remove any surface build-up on pilot and
burner assembly. Wipe the pilot nozzles,
igniter/flame rod and hood. Ensure the pilot
flame engulfs the flame sensor as shown.
Checking Vent System
Qualified Service Technician
Inspect the vent system at the top and at
the base (within the firebox) for signs of
blockage or obstruction. Look for any signs
of dislocation of the vent components.
Fireplace Inspection
Qualified Service Technician
Perform the appropriate fireplace inspection
procedure detailed in this manual.
Replacing Glowing Embers
Homeowner/Qualified Services Technician
Remove the old glowing embers and
vacuum the area. Place new glowing embers
(Figure 49).
Replacing Batteries
Homeowner/Qualified Services Technician
For electronic gas valve models:
Replace the batteries in the battery holder.
Table 39 - Maintenance Performed Periodically—After the Burning Season
Maintenance Task
Performed By
Performed By
Cleaning Firebox Interior
Homeowner
Carefully remove logs, volcanic stone and
glowing embers / glass media. Vacuum out
interior of the firebox. Clean firebox walls and
log grate, if installed. Replace removed items
as detailed in this manual.
Check Flame Patterns and Flame Height
Homeowner
Verify the flame pattern and height displayed
by the fireplace (Figures 39 and 40). Flames
must not impinge on the logs.
Checking Vent System
Homeowner
Inspect the vent system at the top and at
the base (within the firebox) for signs of
blockage or obstruction. Look for any signs
of dislocation of the vent components.
Cleaning Glass Door
Homeowner
Clean as necessary following the directions
provided in this manual (Page 57). Do not
touch or attempt to clean the glass while hot.
