Superabrasive
Owner’s Manual Original Language – Lavina
®
V32G-X/GTX
14/2019
47
9. DISPOSAL
If your machine after time is not usable or needs to be replaced, send the machine back to Superabrasive or a local
distributor, where a professional disposal complying with the environment laws and directives is guaranteed.
10
. MANUFACTURER’S CONTACTS
If you need to contact Superabrasive Inc. with technical support questions, below is the contact information.
Address;
9411 Jackson Trail Road, Hoshton GA 30548, USA
Email:
Tel.:
706 658 1122
Fax:
706 658 0357
Website:
11. CE-CERTIFICATION
All LAVINA® dust collectors are designed to operate correctly in an electromagnetic atmosphere of industrial type, and
are equipped with all of the mechanical and electrical safety protections in conformity with the following European CEE
rules and regulations:
LAVINA® Vacuums comply with the Safety Directive for machines 2006/42/EC, the EMC Directive 2004/108/EC and
the Low Voltage Directive 2006/95/EC.
They also comply with the norms in use UNI EN 13857, CEI EN 60204-1, CEI EN 61000-3-2, CEI EN 61000-3-3, CEI
EN 55014.
Test results are a part of the machine’s technical information and can be provided upon request. The vacuum unit
machine is delivered with the CE mark exposed and is provided with a EC declaration of conformity
.
12. EMISSION CONTROL WARRANTY STATEMENT
CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS
The California Air Resources Board and Superabrasive Inc. are pleased to explain the emissions control system
warranty on your 2016 small off-road engine (SORE). In California, new SORE must be designed, built and equipped to
meet the State’s stringent anti-smog standards. Superabrasive Inc. must warrant the emission control system on your
SORE for the period of time listed below provided there has been no abuse, neglect or improper maintenance of your
SORE.
Your emission control system may include parts such as the carburetor, fuel-injection system, the ignition system,
catalytic converter, fuel tanks, fuel lines, fuel caps, valves, canisters, filters, vapor hoses, clamps, connectors, and other
associated emission-related components.
Where a warrantable condition exists, Superabrasive Inc. will repair your SORE at no cost to you including diagnosis,
parts and labor.
MANUFACTURER'S WARRANTY COVERAGE
The emission control system is warranted for 2 years. If any emission-related part on your equipment is defective, the
part will be repaired or replaced by Superabrasive Inc.
OWNER'S WARRANTY RESPONSIBILITIES
As the small off-road engine (SORE) owner, you are responsible for the performance of the required maintenance listed
in your owner's manual. Superabrasive Inc. recommends that you retain all receipts covering maintenance of your
SORE engine, but Superabrasive Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure
the performance of all scheduled maintenance.
As the SORE owner you should however be aware that Superabrasive Inc. may deny your warranty if your SORE or its
part has failed due to abuse, neglect, improper maintenance or unapproved modification.
You are responsible for presenting your utility equipment engine to a Superabrasive Inc. distribution center as soon as
the problem exists. The warranty repairs should be completed within a reasonable amount of time, not to exceed 30
days. If you have any questions regarding your warranty rights and responsibilities, you should contact Superabrasive
Inc. at 1-(800)-987-8403 or by e-mail at [email protected]
Superabrasive Inc
9411 Jackson trail Rd
Hoschton, GA
USA, 30548
