Superabrasive
Owner’s Manual Original Language – Lavina
®
V32G-X/GTX
14/2019
21
CHECK AND REPLACE AFTER THE FIRST 8 WORKING HOURS
Replace the oil in the engine after the first 8 hours work, according to the instructions of the engine manufacturer.
ALWAYS USE 30HD OR 10W30 ENGINE OIL WITH ALL OF THE FOLLOWING RATINGS: SF, SG, AND CC
CHECK AND REPLACE EVERY 50 WORKING HOURS
Change engine oil, while changing check for leakage of engine oil at the various seals. The hour meter will blink
between 48-52 hours as a reminder/"Engine Oil Capacity" is 1.5L(1.6US.qt) when oil filter is not removed ;
1.7L(1.8US.qt) when oil filter is removed.
Recommended Oil Change Intervals
Do not exceed the 50-hour oil change interval. Oil changes more frequent than 25 hours will give even longer engine
life. In any case, always use 30HD or 10W30 engine oil with all of the following ratings: SF, SG, and CC. make sure the
oil level is maintained at the "FULL" level.
OPERATION
INTERVAL
Daily
First
8
Hrs.
Every
50
Hrs.
Every
100
Hrs.
Every
200
Hrs.
Every
300
Hrs.
Every
400
Hrs.
Every
500
Hrs.
Check & add engine oil
X
Check for loose or lost fasteners
X
Check for oil leakage
X
Inspect fuel hose and connections
X
Clean engine dust filter
X
Inspect throttle & wire
X
Change engine oil
X
X
Change engine oil filter
X
X
Check & clean primary air filter
X
Check secondary air filter
X
Inspect battery and battery connections
X
Replace engine primary air filter
X
Replace engine pre filter
X
Inspect, clean & re-gap spark plugs,
Replace if necessary
Check & adjust valve clearance *
Re-torque heads *
X
Clean & lap valve seating surface *
X
Check engine emissions
X
Inspect Centrifugal clutch *
X
Check the turbine belt tension
X
* Return machine to authorized service center for overall checkup of the Engine. For Propane safety, have
the machine serviced by a Certified Technician, including emission check.