Superabrasive
Owner’s Manual Original Language – Lavina
®
V32G-X/GTX
14/2019
18
Service Alerts
The Fuel-Minder also provides equipment-specific service alerts for the following items:
Air Filter
Oil Filter
Spark Plugs
Seal Replacements
Chain Inspections
Belt Inspections
Tooling Inspections
Each item has individual alerts at different hour intervals, and the Fuel-Minder will start alerting the user of upcoming
maintenance within 3 hours of when it is due. To reset a particular service alert, simply scroll to it, using the
+
or
-
buttons, then hold the reset button for 2 seconds. The meter will then prompt you to reset that interval.
Sleep Mode
To conserve equipment battery life, the Fuel-Minder will enter sleep mode if there are no key inputs or engine activity.
The backlight will dim after 30 seconds of inactivity, then turn off after 1 minute. The display will turn off after 2 minutes.
To wake from sleep mode, simply press any key or start your engine.
MAIN MENU NAVIGATION AND USE
This section outlines how to navigate the menu and interact with certain features.
MAIN MENU
The Main Menu contains the following screens, which can be viewed by simply using the
+
and
-
buttons to scroll.
Please note: Upon startup or waking from sleep mode, the first screen shown is always Engine Hours.
-
Engine Hours (Default screen)
-
Clean Filters
-
Oil Filter
-
Spark Plugs
-
Chain Inspections
-
Seal Replacements
-
Belt Inspections
-
Tooling Inspections
-
Battery Voltage
-
Tachometer
-
Options Menu
LED Alerts & Resetting Service Intervals
The Fuel-Minder will alert you when service is due by blinking a red LED within 3 hours of the specified interval and
displaying “Service Due” on the LCD screen. When you see this light, simply scroll through your menu to see which
service item is due. To reset a specific interval, just scroll to that particular screen (for example, Oil Change), then hold
the
SELECT
button for 2 seconds until you see the reset prompt, then press the
+
button to reset that interval.
OPTIONS MENU NAVIGATION AND USE
OPTIONS MENU
To enter the options menu, simply scroll until
Options Menu
is displayed on the screen, then press
SELECT
. The first
option displayed by default is
Add Password
. Use the
+
or
–
buttons to scroll and view other options. To exit the
options menu, scroll until you see
EXIT OPTIONS
, then press
SELECT.
Add Password-
This option allows you to add a password that prevents unauthorized users from resetting service
intervals or performing a factory reset. This is a 4-digit pin that you set.
Change Password
-
Allows you to change your password, if one is saved. Note: This option is hidden unless a
password has been created.
Remove Password
-
Used to disable the password feature, if a password is saved. Note: This option is hidden unless a
password has been created.
Factory Reset
-
CAUTION, this option will erase all memory and restore your device to factory condition. This also
allows for resetting the total engine hours. Password required if set.
Factory Unlock
-
This option is only used by SuperAbrasive and requires a factory assigned pin number to activate.
