Superabrasive Lavina 32, Owner'S Manual

Page: 6 / 51

Superabrasive Owner’s Manual – Lavina32
®
/32
®
HV 09/2009
6
Figure 3
•
The electrical box contains the electric switching devices and the inverter. The motor feeding
cable and the main feeding cable are plugged in the socket located on the bottom of the box.
•
The water tank is on the opposite side of the frame, so that the weight of the water has no
influence on the operation of the machine. The frame weight, on the other hand, is totally absorbed by
the driving wheels.
•
The self-leveling skirt is designed of a heavy material so that the skirt has contact with the
ground at all times regardless of the thickness of the tools used. The skirt adjusts its position depending
on the tool height used.
•
The motor is mounted on the base plate, and is driving the six planetary heads with a belt
system. The Lavina 32
®
/32
®
HV machine is a planetary movement machine. The planetary motion derives
from the friction between the tools and the floor, which is allowing the tools to spin in either clockwise or
counterclockwise direction. The design ensures that the tools will not force themselves against the
resistance of the floor surface. Instead, the machine will alternate directions to accommodate to a “high
spot” or a “low spot” imperfections in the floor without causing damage to the floor or the machine.
Technical Data
Lavina 32
®
Working width 811mm 32”
Tool holder diameter 6 x 165 mm 6 x 6.5”
Tool diameter 6 x 225mm 6 x 9”
Tool holder rpm 300-1100 rpm
Power 15 kW/20hp 15 kW 20hp
Weight 345 kg 760 lbs
Grinding pressure 250kg 550 lbs
Additional weight Max 2x29 kg 2x64 lbs
Application Wet and dry
Vacuum hose port yes
Water tank capacity 46 l 12 gal
Water feed Peripheral
Voltage/Hz 3 x 200-240 Volt 50-60 Hz
Amperage 60 Amp