Superabrasive Lavina 32, Owner'S Manual

Page: 13 / 51

Superabrasive Owner’s Manual – Lavina32
®
/32
®
HV 09/2009
13
The bracket has another use. A shackle that supports the cable is placed in it. Thus the cable will not
prevent the operator from working (Fig.13).
Figure 12 Figure 13
Transportation
The Lavina 32
®
/32
®
HV is engineered with easy transportation in mind. The ability to dismantle the
machine in two parts adds to its convenient transportation and storage.
Always store and transport the Lavina 32
®
/32
®
HV in a dry place. Never transport the Lavina 32
®
/32
®
HV
unprotected; it may be damaged if transported unprotected during rain or snow.
OPERATION
Preliminary Controls
Inspect the working area as explained in the safety instructions.
For wet use – fill in the water tank when the electrical cable is disconnected. For dry use - connect the
vacuum extractor to ensure that the vacuum hose is clear and it will follow the machine easily. Plug in the
machine and also make sure that the power cord is free to follow the working direction of the Lavina
32
®
/32
®
HV.
Adjusting and Mounting Tools
Mount the tools only after ensuring that there is enough diamond bond material left. Be sure that the
plates are always clean before mounting. Always use the special key for mounting or adjusting, as seen
below. Adjusting and mounting are shown on Fig.14
Figure 14