Superabrasive
Owner’s Manual – Lavina32
®
/32
®
HV
09/2009
12
Figure
6
Figure
7
The machine is constructed to be picked up without dividing the carriage from the main head, but it is
necessary to have picking-up application.
For the picking-up follow the instructions:
•
Pull out the pins from the hole on base of the wheels (Fig 8.).
•
Pull back the handle below the wheel (Fig.9)
•
Turn the wheel until its hole matches the hole of the base of the wheel which is in front.
Figure
8 Figure
9
•
Put the pin sets in the holes (Fig.10). The wheel should be over the main head (Fig.11)
Figure 10
Figure 11
•
Through the bracket below the handle should be placed a belt with whose help the machine is picked up
(Fig. 12).
Summary of Contents for Lavina 32
