Superabrasive Lavina 32, Owner'S Manual

Page: 11 / 51

Superabrasive Owner’s Manual – Lavina32
®
/32
®
HV 09/2009
11
The Work Area
Make certain that people or vehicle do not enter the work area.
Avoid cables and hoses being in the way.
Always check the floor for debris
Equipment
Always wear safety shoes when working with the machine.
Always wear ear protectors when working with the machine.
All personnel in the immediate work area must wear safety glasses with side shields.
Always wear safety gloves when changing the tools.
Always wear clothes suitable for the work environment.
The machine shouldn’t be in a position for changing the tools when you turn it on.
Operator
Only one operator at a time can work with the machine.
The operator must be properly trained and well instructed prior to operating the machine.
The operator must understand all the instructions in this manual.
The operator must understand and interpret all the drawings and designs in manual.
The operator must know all sanitation and safety regulations pertaining to the operation of
the Lavina 32
®
/32
®
HV machine.
The operator must know the machine’s work environment.
The operator must have floor grinding experience.
The operator must know what to do in case of emergency.
The operator must have an adequate technical knowledge and preparation.
HANDLING AND TRANSPORTATION
Preparing the machine for transportation
Unplug the motor cable plug from the control box and disconnect the water hose from the head by pulling
it out (Fig 4). Wind the electrical cable on the carriage (Fig.5). Release the pin sets which attach the head
to the carriage (Fig 6.). Pull out the water hose and the vacuum hoses and dismount the head from the
carriage (Fig.7).
Figure 4
Figure 5