Superabrasive
Owner’s Manual Original Language –
Lavina 32
®
Pro /32
®
HV Pro
2/2014
8
LEADING POWER CABLE
There is the possibility to lead the power cable through a shackle mounted on
the hoisting ring.
STORAGE
Always store and transport the Lavina 32® Pro/32®HV Pro in a dry place.
Never transport the Lavina 32® Pro/32®HV Pro unprotected; it may be
damaged if transported unprotected during rain or snow.
THIRD WHEEL
With Lavina 32® Pro/32®HV
Pro there is a possibility for
mounting of a 3rd wheel
support complete assembly
(Fig.3.22), which ensures
easier handling - Item number
is L32P-3WS
Mounting/Dismounting with Pin
assembly (see fig. 3.24 1-2)
Look to it that the longest base
side (fig. 3.24. 5-6) is mounted
on top.
While working there is a possibility to turn the wheel support 90º (fig. 3.23 4). Pull the pin and place it in the hole (fig.
3.24. 5-6).
4. OPERATION
PRELIMINARY CONTROLS
Inspect the working area as explained in the safety instructions. For wet use, fill in the water tank when the electrical
cable is disconnected. Connect the vacuum extractor and ensure that the vacuum hose is clear and it will follow the
machine easily. Plug in the machine and make sure that the power cord is free to follow the working direction of the
Lavina 32® Pro/32®HV Pro.
ADJUSTING AND MOUNTING TOOLS
Mount the tools only after ensuring that
there is enough diamond bond material
left. Be sure that the plates are always
clean before mounting. Always use the
tool holder key (Fig.4.2)
Diamond tools with Velcro are attached on
six foam plates of 9 inch. The foam plates
(Fig. 5.4) are mounted the same way as
the other tools.
CONTROL OF THE WATERFLOW
On right side of the Lavina 32® Pro/32®HV Pro
is water supply regulation unit.
The valve (Fig. 4.4 1) is regulating the flow out of
the tank. The valve (Fig. 4.4 2) is controlling the
flow of an external water supply. A ¾” water tube
can be attached to the quick connection (Fig. 4.4
2).
Figure 3.21
Figure 3.23
Figure 3.24
Figure 3.22
Figure 4.3
Figure 4.4
Figure 4.2
Figure 4.1
