Superabrasive
Owner’s Manual Original Language –
Lavina 32
®
Pro /32
®
HV Pro
2/2014
4
ENVIRONMENTAL CONDITIONS
The temperature range for operating the Lavina 32® Pro/32®HV Pro outdoors is between 41°F and 86°F or 5°C and
30°C. Never use the Lavina 32® Pro/32®HV Pro during rain or snow when working outdoors. When working indoors,
always operate the machine in well-ventilated areas.
ELECTRICAL CONNECTION
The voltage (Volt) and power (Ampere) are displayed on a label on the electrical control box to avoid any incorrect
connection. Refer to these before connecting the power. To avoid electrical shocks, make sure the ground power
supply is functioning properly.
VACUUM CONNECTION
A connection for a vacuum dust extractor is located on the carriage. The Lavina 32® Pro/32®HV Pro does not include a
vacuum dust extractor. The customer must purchase the vacuum dust extractor separately. The hose of the vacuum
extractor must be Ø 76 mm/3 Inch and can be glided over the three-way pipe. The vacuum dust extractor must be
adapted for floor grinders and have a minimum air displacement of 500m3/h with a negative vacuum of 21 kPa.
TECHNICAL DATA
VIBRATIONS
The vibrations of the machine are within the limits of directive 2003/10/EC (the seventeenth Individual Directive of
Article 16(1) of Directive 89/391/EC) if the Lavina 32® Pro/32®HV Pro is operated with the recommended tools and in
normal conditions.
SONOROUS EMISSIONS
Sonorous emissions are also within the limits of directive 2003/10/EC (the seventeenth individual Directive of Article
16(1) of Directive 89/391/EC). However, as previously stated, the operator must wear ear protectors.
LABEL DATA
The data on the label provides the correct voltage and kW (needed for operational purposes);
Weight (needed for transportation purposes); production year and serial number (needed for maintenance purposes).
CUSTOMER SERVICE
For customer assistance and technical support call your local distributor or call Superabrasive Inc. at
1-800-987-8403 or visit us at
www.superabrasive.com
, where you can download a copy of this manual.
2. SAFETY INSTRUCTIONS
RECOMMENDED USE
The Lavina 32N Pro/32NHV Pro machine is designed and
manufactured to grind and polish concrete, terrazzo and natural
stone floors. It can be used for renovations as well as for
polishing. The machine is designed for dry or wet use. When
using it dry, use a vacuum of appropriate size. For more
information, please refer to the chapter on handling the vacuum
connection.
PROHIBITED USE
The machine MUST NOT be used:
Lavina 32® Pro
Lavina 32®HV Pro
Voltage/Hz
3ph x 200-240 V 50/60Hz
3ph x 380-480 V 50/60Hz
Amperage
60 Amps
32 Amps
Power
15 kW
20 hp
15 kW
20 hp
Tool holder rpm
300-1100 rpm
300-1100 rpm
Working width
811mm
32”
811mm
32”
Tool holder diameter
6 x 165 mm
6 x 6.5”
6 x 165 mm
6 x 6.5”
Tool diameter
6 x 225mm
6 x 9”
6 x 225mm
6 x 9”
Weight
400 kg
882 lbs
400 kg
882 lbs
Grinding pressure
290kg
638 lbs
290kg
638 lbs
Additional weight
max 2x29kg
128 lbs
max 2x29kg
128 lbs
Application
wet and dry
wet and dry
Vacuum hose port
76 mm
3”
76 mm
3”
Water attachment
Quick change for ¾” hose
Quick change for ¾” hose
Water tank capacity
46 l
12 gal
46 l
12 gal
Water feed
Peripheral
Peripheral
Cable length
17.4 m
57 ft
17.4 m
57 ft
Machine LxWxH
2335x850x1100 mm
92”x34”x44”
2335x850x1100 mm
92”x34”x44”
Packing LxWxH
1175x950x1280 mm
46”x37”x50”
1175x950x1280 mm
46”x37”x50”
