Superabrasive Lavina 32 Pro, User Manual

Page: 2 / 36

Superabrasive Owner’s Manual Original Language – Lavina 32
® Pro
/32
®
HV Pro 2/2014
2
CONTENT
1. GENERAL INFORMATION
Preface 3
Manufacturer 3
General Description 3
Machine Characteristics 3
Lavina32®/32®HV Pro Main Design 3
Environmental Conditions 4
Electrical Connection 4
Vacuum Connection 4
Technical Data 4
Vibrations 4
Sonorous Emissions 4
Label Data 4
Customer service 4
2. SAFETY INSTRUCTIONS
Recommended Use 4
Prohibited Use 4
Preparation for Work 5
Protection Devices 5
Arrest Functions 5
Safe Use 5
Residual Risks 5
Before You Begin 5
Operating the Machine 5
After Work is completed 5
The Work Area 5
Personal Protective Equipment (PPE) 5
Operator 5
3. HANDLING AND TRANSPORTATION
Using the Steering Bracket 6
Positioning the Handle 6
Flipping the Machine up 7
Splitting the Carriage from the Main head 7
Lifting 7
Leading the Power Cable ..8
Storage 8
Third Wheel 8
4. OPERATION
Preliminary Controls 8
Adjusting and Mounting Tools 8
Control of the Water flow 8
Control Board 9
Starting the Machine 9
Operating Machine 9
Stopping Machine 9
Alarm 9
5. TOOLS AND ACCESSORIES
Weights 10
Tool holder key 10
Foam plate 10
Third Wheel 10
6. POPULAR TOOLS
Recommended tools 11
7. MAINTENANCE AND INSPECTION
Cleaning 12
Check Daily 12
Check after the first 15 Working Hours 12
Check Every 100 Working Hours 12
Check Every 200 Working Hours 12
Check Every 400 Working Hours 12
Vacuum 12
Water Leaks 12
Electrical system 12
Mechanical Parts 12
Lavina32® Pro Electrical schemes 208-240 Volt 13
Lavina32®HV Pro Electrical schemes 380-480 Volt 14
8. TROUBLESHOOTING
Index of Problems and Solutions
Replacing Power Cord and Plugs
15
Adding or Removing Buffers in the SA Tool Holder 15
Dismounting and mounting SA tool holder 15
Dismounting and mounting SAM tool holder 16
Replacing the Gear Unit 17
Tensioning and Replacing the Belts 17
ReplacIing the Pulley s 18
Motor Connection 18
Fault diagnosis Inverter YASKAWA V1000 19
9. WARRANTY, WARRANTY CARD AND
RETURNS
Warranty 22
Return
Policy 22
10. DISPOSAL
22
11. MANUFACTURER’S CONTACTS
12. SPARE PARTS
SA Tool Holder 23
SAM Tool Holder 24
Assembly and Parts Specifications 25
Assembly and parts specification main head Motor Fan27
Assembly and parts specification of the Seal assembly 27
Assembly and parts specification of the main head-
Bottom cover assembly 28
Assembly and parts specification of the main head
Pulley Unit 29
Assembly and parts specification of the main head
Top Cover 30
Assembly and parts specification of the main head
Motor Support 31
Assembly and parts specification of the main head
Central Shaft Bearing 32
Assembly and parts specification of the main head
Guard Assembly 32
Assembly and parts specification of the carriage 33
Assembly and parts specification of the carriage
Steering
Bracket 34
Lavina32® Pro Assembly and parts specification
of the electrical and control box 208-240 Volt
35
Lavina32®HV Pro Assembly and parts specification
of the electrical and control box 380-480 Volt
36