Superabrasive
Owner’s Manual Original Language –
Lavina 32
®
Pro /32
®
HV Pro
2/2014
18
REPLACING THE PULLEYS
Take the belt tension away (see the previous paragraph).
After removing the belts, unscrew the four bolts of the
pulleys on top of the disc (Fig. 8.12 1). For the drive pulley
(Fig. 8.12 2), take away the gear, described in the
paragraph “replace the gear unit’. Mount in same way.
MOTOR CONNECTION
In case of changing the motor, please check the cable connection to your motor.
Lavina32® Pro
The motor is connected in
“Delta”
(Triangle) 230 Volt, reminder for
the wire connection of the motor.
Lavina 32®HV Pro
The motor is connected in “Star”
380 Volt, reminder for the wire
connection of the motor.
Figure 8.10
Figure 8.11
Figure 8.9
Figure 8.13
Figure 8.14
Figure 8.12
1
2
