Superabrasive
User Manual Original Language
Lavina® 20G-X
4/2018
32
inclination. Then unscrew the nuts pos.2 (Fig.8.9.2) and pos.7(Fig.8.9.2), as well as the nuts in pos. 1 and pos.8 to have
possibility to dismount the two old chains.
Mount the new chains (Fig.8.10.3 - Fig.8.10.6), using the the chain link pin and the split pin. First tighten the longer chain
(Fig.8.9.7;Fig.8.9.8) then the second one (Fig.8.10.9;Fig.8.10.10).The tensioner of the planetary chain should allow chain
sagging 3...5mm/1/8...3/16 in/ controlled in span X (Fig.8.9.2). Be sure to tighten the locking nuts (Fig.8.10.11; Fig.8.10.12;
Fig.8.10.13;Fig.8.10.14)
ATTENTION: NEVER “OVER” TENSION THE CHAIN,
THE CHAIN WILL BE DAMAGED
ATTENTION: BE VERY CAREFULL PLACING BACK THE METAL COVER, NOT TO DAMAGE THE RUBBER V RING. IT
SERVES TO PROTECT THE PLANETARY CHAINS FROM THE DUST AND MOISTURE. PUT THE METAL COVER WITH
DOWNWARD MOVEMENT FOLLOWING THE TWO CONDUCTORS POS.8 (Fig.8.10.1) AND THE EDGES POS. 9
(Fig.8.10.1) OF THE PROPANE MOTOR CARRIER.
Figure 8.10.3
Figure 8.10.4
Figure 8.10.5
Figure 8.10.6
Figure 8.10.7
Figure 8.10.8
Figure 8.10.9
Figure 8.10.10
Figure 8.10.11
Figure 8.10.12
Figure 8.10.13
Figure 8.10.14
