Superabrasive
User Manual Original Language
Lavina® 20G-X
4/2018
14
DUAL HOUR METERS
The Fuel-Minder has two hour meters, one for the engine and the other for equipment. The Engine Hours are
resettable, which should only be done if the engine is replaced. The Equipment Hours (located in Options Menu) is
non-resettable and shows the total hours on the equipment, similar to the odometer of a vehicle
.
BATTERY VOLTMETER
This feature allows for real-time display of the battery’s voltage, which also helps for troubleshooting any battery or
charging system issues that may arise.
ENGINE TACHOMETER
Displays the current engine speed (in RPM). This should be used to assess proper idle, WOT and engine speed for the
appropriate tooling.
JOB TIMER
The job timer feature works when it is activated and while the engine is running, and will not continue to run if the
engine is stopped. The job timer allows for easy timing of jobs or work areas to help determine speed.
PASSWORD PROTECTION
Located in the options menu, the password feature allows a maintenance manager or owner to enable a password
that prevents the user from resetting the Service Due alerts without the appropriate pin.
SERVICE ALERTS
The Fuel-Minder also provides equipment-specific service alerts for the following items:
Air Filter
Oil Filter
Spark Plugs
Seal Replacements
Chain Inspections
Belt Inspections
Tooling Inspections
Each item has individual alerts at different hour intervals, and the Fuel-Minder will start alerting the user of upcoming
maintenance within 3 hours of when it is due. To reset a particular service alert, simply scroll to it, using the
+
or
-
buttons, then hold the reset button for 2 seconds. The meter will then prompt you to reset that interval.
SLEEP MODE
To conserve equipment battery life, theFuel-Minder will enter sleep mode if there are no key inputs or engine
activity.The backlight will dim after 30 seconds of inactivity, then turn off after 1 minute. The display will turn off after
2 minutes. To wake from sleep mode, simply press any key or start your engine.
MAIN MENU NAVIGATION AND USE
This section outlines how to navigate the menu and interact with certain features.
MAIN MENU
The Main Menu contains the following screens, which can be viewed by simply using the
+
and
-
buttons to scroll.
Please note: Upon startup or waking from sleep mode, the first screen shown is always Engine Hours.
-
Engine Hours (Default screen)
-
Clean Filters
-
Oil Filter
-
Spark Plugs
-
Chain Inspections
-
Seal Replacements
-
Belt Inspections
-
Tooling Inspections
