Superabrasive
Owner’s Manual Original Language LAVINA
®
16-S-E
6/2014
8
5. TOOLS AND ACCESSORIES
WEIGHTS
Superabrasive offers an additional weight for
increasing the productivity of the machine
(Fig.5.1). Each additional weight weighs
about 21 lbs or 9,8 kg. Each individual
application, type and condition of surface,
power capacity of the outlet, etc. will
determine the number of weights you can
use without tripping a breaker. The weight
stacks on to three posts around the outer
bowl (Fig.5.2).
The additional weight depends on the tools; it is not always possible to add a weight. Some tools work too
aggressively and the machine can stop. The weight can be ordered with item
number L16-12.00.00.00
BELT REPLACING TOOL
You need the belt replacing (fig.5.3) tool when you want to replace the belt. It is
explained below in chapter Troubleshooting.
This tool can be ordered with number L16-11.00.00.00
TOOL HOLDER KEY
The tool holder key (Fig. 5.4) is used for adjusting, mounting and dismounting of the
tools. Always use the key for mounting. Item number is A03.00.00.00
FOAM PLATE
Diamond tools with Velcro are mounted on the foam plate 7“(Fig.5.5). The foam plate
is mounted on the “QuickChange”System. Item number is LV-7-FP-S.
SECURITY PLATE FOR QUICKCHANGE PADS
Plate used to ensure the “Quickchange” pads.
Item number is A38.00.03.
Figure 5.1
Figure 5.2
Figure 5.4
Figure 5.3
Figure 5.5
Figure 5.6
