Superabrasive
Owner’s Manual Original Language LAVINA
®
16-S-E
6/2014
6
The operator must be properly trained and well instructed
prior operating the machine.
The operator must understand all the instructions in this
manual.
The operator must understand and interpret all the
drawings and designs in manual.
The operator must know all sanitation and safety regulations
pertaining to the operation of
The operator must have floor grinding experience.
The operator must know what to do in case of emergency.
The operator must have an adequate technical knowledge
and preparation.
3. HANDLING AND TRANSPORTATION
PREPARING THE MACHINE FOR TRANSPORTATION
Unplug the motor cable plug from the control box and disconnect the water hose from the main head by pulling it
out (Fig. 3.1). Wind the electrical cable on the carriage(Fig. 3.2). Pull out the vacuum hoses(Fig. 3.3).
Release the pin sets (Fig. 3.4) which attach the head to the carriage and dismount the head from the carriage
(Fig. 3.5).
The head of the Lavina® 16-S-E has one bar and a support used as handles intended for easy moving and
transportation.
The Lavina
®
16-S-E is engineered with easy transportation in mind. The ability to dismantle the machine in two
parts allows convenient transportation and storage (Fig.3.4).
STORAGE
Always store and transport the Lavina® 16-S-E in a dry place. Never transport the Lavina® 16-S-E
unprotected; it may be damaged if transported unprotected during rain or snow.
4. OPERATION
PRELIMINARY CONTROLS
Inspect the working area as explained in the safety instructions. For wet use, fill in the water tank when the
electrical cable is disconnected. Connect the vacuum extractor and ensure that the vacuum hose is clear and it
will follow the machine easily. Plug in the machine and also make sure that the power cord is free to follow the
working direction of the Lavina
®
16-S-E.
ADJUSTING AND MOUNTING TOOLS
Mount the tools only after ensuring that there is enough diamond bond material left. Be sure that the plates are
always clean before mounting (Fig.4.1).
Figure 4.1
Figure 4.3
Figure 4.2
Figure 4.4
Figure 3.1
Figure 3.3
Figure 3.2
Figure 3.4
Figure 3.5
