Superabrasive
Owner’s Manual Original Language LAVINA
®
16-S-E
6/2014
3
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
16-S-E machine, the servicing technician as well as for
anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully
and follow them strictly. The manual includes information about assembling, using, handling, adjusting and maintaining
your Lavina
®
16-S-E floor grinding and polishing machine.
MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete
industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and floor
grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable them to
work more efficiently.
GENERAL DESCRIPTION
The Lavina
®
16-S-E machine is intended for grinding, polishing and buffing concrete, marble, granite, limestone and
terrazzo surfaces with diamond tools.
The Lavina
®
16-S-E is a three-disc machine, which can be used dry as well as wet.
For best results, use only tools manufactured or recommended by Superabrasive and its distributors. Additionally, the
machine could be used for grinding wood floor surfaces.
The Lavina
®
16-S-E machine is manufactured and fitted for the above-mentioned applications only! Every other use
may possess risks to the persons involved.
MACHINE CHARACTERISTICS
The Lavina
®
16-S-E is made of two main component sections:
LAVINA
®
16-S-E MAIN DESIGN
The two main component sections
, the carriage (1) and main head (2).
The handle on the frame is adjustable in height and allows the operator to work in a correct
and safe posture.
The controls
are positioned on top of the frame
(fig.1.2)
The electrical box
(fig.1.3) contains the electric
switching devices and the inverter. The motor
feeding cable and the main feeding cable are
plugged in the socket located on the bottom of the box.
The water tank
is on the opposite side of the frame, so that the weight of the
water has no influence on the operation of the machine. The frame weight, on the
other hand, is fully absorbed by the driving wheels.
• The motor
is mounted on the base plate and is driving the three heads with a belt system. The planetary head is
driven by a second flat belt.
Figure 1.1
Figure 1.2
