background image

2

1. 

BREAKAGE OR DAMAGE DURING SHIPMENT

The transportation company is fully responsible for all shipping damage and will resolve problems promptly if you handle it

correctly. Please read these instructions carefully.

Examine the contents of all shipping cases. If you find any damage, call your transportation agent at once and have them

make a description on the freight or express bill describing the damage and the number of pieces. Then write us and we will

send you the original bill of lading. Get a claim blank from the express or truck company. Fill the claim form out. Attach the

claim blank to the original bill of lading together with a copy of our invoice. Attach a memo on which you show the value of the

damaged goods. Mail or hand these papers to your local transportation agent. They will process your claim with reasonable

promptness.

Please note, we cannot and will not enter claim for damages. If we filed claim here, it would be sent to your local freight agent

for verification and investigation. This time can be saved by your filling the claim directly. Every consignee is on the ground

floor  and  in  contact  with  the  local  agent  who  inspects  the  damaged  goods  and  thus,  each  claim  can  be  given  individual

attention.

Since our goods are packed to comply with the regulations of all railroad, truck and express companies, we cannot allow

deduction from any invoice because of any damage, however, be sure to file your claim promptly. Our goods are sold F.O.B.

factory. We take receipt from the transportation company certifying that the goods were delivered to them in good order, and

our responsibility ceases.

It  is  seldom  that  any  breakage  or  damage  occurs  in  any  of  our  shipments,  and  in  no  case  will  the  customer  be  out  any

expense if they follow the above instructions.

Be sure to keep all damaged goods subject to examination of the truck or express company inspector, who may call on you

some time later. These damaged goods, of course, will belong to them, and they will inform you what to do with them. If you

dispose of these damaged goods, your claim may not be paid.

Summary of Contents for CLOUD 9 SMOKER

















Reviews: