Single Gas Sensor Module (SGSM)
Operations Manual
Super Systems Inc.
Page 25 of 30
Page 25 of 51
Set FD: This option resets the sensor board to factory defaults.
Set Reg: This option allows a value to be written to the main board. The first value is the
register location that will be written to; the second value is the value that will be written
to the specified register location. The “Set Val” button, when pressed, will commit the
entered value to the specified register location.
Figure 11 - SSI Configuration Page
Read/Write Registers
The Read/Write Registers page is used for troubleshooting, verification, and setup of the
instrument. Modifications to the SGSM can also be written from this page. Its use is intended
for SSi personnel and SSi support personnel who have been trained and authorized.
Call SSi at (513) 772-0060 with questions or additional help with setting up these alarms.