Single Gas Sensor Module (SGSM)
Operations Manual
Super Systems Inc.
Page 17 of 30
Page 17 of 51
The sensor’s IP Address settings will be changed immediately to allow it to communicate. If you
are unable to find the unit in the list of devices, it is possible that a network setting (such as
subnet mask) may be different, the unit may be connected to a different network, or the unit
may not be powered on. SSi recommends consulting an IT engineer or network administrator. If
needed, call SSi at (513) 772-0060
Control Interface via Web Browser
The SGSM can be controlled using a web browser on your computer. The web browser connects
to the unit through an Ethernet connection. The computer you are using and the unit need to be
on the same network with the same subnet mask. Contact your IT administrator if you have
network setup questions.
Enter the IP Address into the search bar of the web browser.
Access Password:
Contact SSi at (513) 772-0060 for more information on the password used to
access secured options.