Super Start SPSS3 Owner'S Manual Download Page 9

• 9 •

• 

Coil the input and output cords neatly when storing the charger. This will help 

prevent accidental damage to the cords and charger.

• 

Store the charger unplugged from the AC power outlet, in an upright position.  

• 

Store inside, in a cool, dry place. Do not store the clamps clipped together, on 

or around metal, or clipped to the cables.

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

REASON/SOLUTION

Yellow LED is blinking 

and display shows 

CHARGE ABORTED–

BAD BATTERY. 

The battery is sulfated.

The battery is too large 

for the charger.

Reset the charger by 

briefly unplugging it.

You need a charger with 

a higher amp rate.

The display shows 

CONNECT CLAMPS.

Clamps are not making 

a good connection.

The fuse is bad.

Check for poor 

connection at battery 

and frame.

Replace the in-line fuse 

for the ring connector.

The display shows 

ANALYZING BATTERY 

and yellow LED is lit.

The charger is checking 

the condition of the 

battery.

No problem; this is 

normal.

SPECIFICATIONS

Input voltage ................................................................. 120V AC 

@

 60Hz, .91A

Output voltage ...................................... 6V or 12V, with Auto Voltage Detection
Output current rating ..............................................................3A 

@

 6V and 12V

REPLACEMENT PARTS

Cable battery assembly ..................................................................3899002636
Quick-connect cable with fuse  ......................................................2299002042
Cord set with 12V cigarette adapter ...............................................3899001401

BEFORE RETURNING FOR REPAIRS

For troubleshooting info, contact customer service for assistance:

[email protected] • www.batterychargers.com

or call 1-800-621-5485, Monday-Friday 7:00

am

 to 5:00

pm

 CST

For 

REPAIR OR RETURN

, contact Customer Service at 1-800-621-5485.  

DO NOT SHIP UNIT

 until you receive a 

RETURN MERCHANDISE 

AUTHORIZATION (RMA) 

number from Customer Service at Schumacher 

Electric Corporation.

Summary of Contents for SPSS3












Reviews: