• 5 •
FEATURES/CONTROL PANEL
5
4
1
2
1.
Battery status LEDs
2.
AC power cord
3.
Quick-connect cable
with fuse
4.
Cord set w/12V cigarette adapter
5.
Quick-connect battery clamp cable
assembly
3
DIGITAL DISPLAY
The digital display indicates the status of the battery and charger. See the
DISPLAY MESSAGES section for a complete list of messages.
LED DISPLAY
YELLOW LED (solid):
The charger is charging the battery.
GREEN LED (solid):
The battery is fully charged and the charger is in
maintain mode.
OPERATING INSTRUCTIONS
IMPORTANT:
Do not start the vehicle with the charger connected to the AC
outlet, or it could result in damage to the charger.
CHARGING A BATTERY IN THE VEHICLE
1.
Place the charger on a dry, non-flammable surface.
2.
Turn off all the vehicle’s accessories.
3.
Keep the hood open.
4.
Clean the battery terminals.
5.
Lay the AC/DC cables away from any fan blades, belts, pulleys and other
moving parts.
6.
For a negative-ground vehicle (as in most vehicles), connect the
charger’s POSITIVE (RED) clamp to the POSITIVE (POS, P, +) battery
post. Next, connect the charger’s NEGATIVE (BLACK) clamp to the
vehicle chassis or engine block, away from the battery.