Super Gym’s Cardio-zone, Owner'S Manual

Page: 9 / 25

8
ASSEMBLY STEPS
Two people are requested for all assembly steps
(Please note: please follow each step of the assembly
instruction.)
1. First tighten the bottom control wire to the plastic
wire protection sleeve by pulling the guide wire
inside the right upright tube (D). And position it
to the side round hole in the right upright tube,
then insert the upright tubes (C, D) into the two
locations (as the direction arrows shown in the
drawing) on the frame. Secure them with bolts (a)
and wrench provided.
(P.S. In order to prevent it from danger, two persons
are required to assemble the product. Please don't
assemble it alone.)
(P.S. Please be aware that one person must hold the
upright tubes during the assembly process, just in
case, if the tubes fall.)
2. Press the left and right covers (E and F) into
position and secure them with 4 (b) bolts as
shown.