Super Gym’s Cardio-zone, Owner'S Manual

Page: 13 / 25

12
MAINTENCE
1. If the Walking Belt tracks off center to the right or left of
the deck, first turn the power off. Then use a 6mm
wrench (f) to tighten the rear roller bolt on the side of the
treadmill toward which the belt is moving. For
example, if the belt moves to the left and the deck
becomes exposed on the right, tighten the bolt on the left
side of the frame. Tighten about 1/4 of turn (clockwise).
If the belt does not move back to the center of the
treadmill, make another adjustment to the same bolt.
Once the Walking Belt has been adjusted closer to the
center, the treadmill can be started again.
(Ps.1.This action is very important, please follow the
above steps.)
(Ps.2. The potion of running belt might not stay precisely
in the center with slightly moving the left or right side,
and the situation varies with how end-users use and
weight of end-users. When end-user use properly, the
belt won’t scotch side rails. )
2. It is recommended that the deck be lubricated every
6~12 months according to the frequency of usage. First,
use wrench to loosen the bolts in the end caps. Pull up
the Walking Belt, dispense the lubricant on the deck, and
spread evenly. After lubricating the deck, center the
belt, and check the belt tension. Adjust the belt as
mentioned in step 1.
(Ps. If the belt happens to slip, follow the above steps
and lubricate the running deck.)
SUGGESTED PREVENTIVE MAINTENANCE SCHEDULE IN
ACCORDANCE WITH THE AVERAGE RUNNING SPEED
Measurement Speed Interval
6KM/hr below 1 year
6~12KM/hr 6 months
Metric
12KM/hr above 3 moths
4mile/hr below 1 year
4~8mile/hr 6 months English
8mile/hr above 3 moths
Note: This preventive maintenance schedule is
only meant for home use. It is suggested to
maintain the unit every month for
commercial use.