Super Circuits WL-N16P User Manual Download Page 9

Page: 9 / 240

User Manual of Network Video Recorder



TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are

supported.



TCP, UDP and RTP for unicast.



Auto/Manual port mapping by UPnP



Extranet access by SIMPLEDDNS.



Support access by Cloud P2P.



Remote web browser access by HTTPS ensures high security.



The ANR (Automatic Network Replenishment) function is supported, it enables the IP camera save the

recording files in the local storage when the network is disconnected, and synchronizes the files to the

NVR when the network is resumed.



Remote reverse playback via RTSP.



Support accessing by the platform via ONVIF.



Remote search, playback, download, locking and unlocking of the record files, and support downloading

files broken transfer resume.



Remote parameters setup; remote import/export of device parameters.



Remote viewing of the device status, system logs and alarm status.



Remote keyboard operation.



Remote locking and unlocking of control panel and mouse.



Remote HDD formatting and program upgrading.



Remote system restart and shutdown.



RS-232, RS-485 transparent channel transmission.



Alarm and exception information can be sent to the remote host



Remotely start/stop recording.



Remotely start/stop alarm output.



Remote PTZ control.



Remote JPEG capture.



Virtual host function is provided to get access and manage the IP camera directly.



Two-way audio and voice broadcasting.



Embedded WEB server.

Summary of Contents for WL-N16P

















































































































































































































































Search results

Summary of Contents for WL-N16P

Reviews:

Brands by name

Popular brands

Super Circuits WL-N16P, User Manual

Search results

Summary of Contents for WL-N16P

Reviews:

Brands by name

Popular brands