Super Circuits WL-N16P User Manual Download Page 41

Page: 41 / 240

User Manual of Network Video Recorder

Steps:

Click the

icon to edit the parameters; you can edit the IP address, protocol and other parameters.

Figure 2. 24

Edit the Parameters

Channel Port:

If the connected device is an encoding device with multiple channels, you can choose the

channel to connect by selecting the channel port No. in the dropdown list.

Click

to save the settings and exit the editing interface.

To edit advanced parameters:

Drag the horizontal scroll bar to the right side and click the

icon.

Figure 2. 25

Network Configuration of the Camera

You can edit the network information and the password of the camera.

Summary of Contents for WL-N16P

















































































































































































































































Search results

Summary of Contents for WL-N16P

Reviews:

Brands by name

Popular brands

Super Circuits WL-N16P, User Manual

Search results

Summary of Contents for WL-N16P

Reviews:

Brands by name

Popular brands