31
H.264 4/8/16-Channel Networkable DVRs
SECTION 3: DVR SETUP
7. Click the
>>
icon at the right end of the
HDD FULL
line. This feature enables the buzzer sound when the HDD is nearly full.
Select either OFF, 1 G (remaining), 5 G ,10 G, 1 HOUR, 5 HOUR , 10 HOUR, or 20 HOUR.
8. Click the checkbox to the right of the
HDD LOSS
label to enable this alarm. When the HDD is not available, this feature will
sound the buzzer and place the on the desktop.
9. Click the checkbox to the right of the
VIDEO LOSS
label to enable this alarm. When a video signal from a channel is not
detected, this feature will sound the buzzer and place the
Video Loss
label in the channel LIVE view window.
10. After configuring your network settings, click the confirm icon (
a
) in the lower right corner of the screen, click the
Confirm
button in the
Note
window.
11. Press the
MENU
button on the front panel, or right click anywhere to return to the ALARM menu.
3.6.1 Motion detection setup
Motion detection can be configured for each channel individually, or you can apply the same settings to all channels at one time.
1. On the
ALARM
tab menu, click the
>>
icon on the MOTION line to open the MOTION DETECTION menu.
