background image

14

www.supercircuits.com

SECTION 2: INSTALLING YOUR SYSTEM

ii. 

Connect each audio feed to the audio adapter cable RCA connector with the number of the camera channel it is 
associated with. For instance, if the audio feed is associated with the camera on Vin channel 8, plug the audio feed 
into the RCA connector labeled A-In8. 

iii. 

If you are monitoring live audio through a sound system, plug the RCA A-Out connector (line level signal) to an 
audio amplifier system, or powered speaker. 

5.  Power on your system monitor.

6.  Power on the DVR using the POWER switch on the backpanel. A startup “Loading” screen will appear on the display. After a 

few seconds, the screen will change to the camera view screen. 

 .. 

Note

: The images you see from your cameras may be different from those shown here. 

2.4  Adjusting the camera

Adjust your camera to produce the best performance:

• 

While observing video from your camera, use the documentation provided to aim the camera at the surveillance target. 

• 

Depending on the features of your cameras, other adjustments, such as focus, zoom, aperture, IR level, etc. may also be 
available. Make these adjustments under various lighting conditions, if necessary, to yield the best video image overall.  

Summary of Contents for DMR90U

































































































Reviews: