Super Circuits DMR 1, User Manual, Page: 47 / 69

EVENT: when alarm input is triggered, DVR will record alarming channel more frequently.
For example : The recording sequence for CH01 when triggered is 1-2-1-3-1-4….
NORMAL: DVR will record normally when input is triggered.
OFF: DVR will not record when alarm input is triggered.
EVENT
Only 16 recorded events will be displayed per page, press
LEFT
◄
or RIGHT
►
arrow keys to
change the pages or press UP
▲
DOWN
▼
arrow keys to CLEAR the EVENT record.
M-HDD WARNING: Master HDD might be failing.
M-HDD LOSS: Master HDD does not exist.
M-HDD ERROR: Master HDD error.
HDD FULL: HDD is full
SYSTEM ERROR: System failed.
2 VLOSS: Channel: 2 Video losses.
3 ALARM: Channel: 3 External I/O Alarms triggered
POWER RESTORE: Power restore
◄
: PAGE UP
►
: PAGE DOWN
▲
+
▼
: CLEAR
(MENU)
SEARCH
TIMER
RECORD
CAMERA
SYSTEM
►
EVENT
NETWORK
NETWORKING
View video from your PC anywhere in the world by connecting your DVR LAN connection to your
network system. Only DMR 9N and DMR 1N are net workable.
1. Connect DVR LAN connection to your LAN router.
2. To connect to the world wide area network for remote viewing you must configure your
router to allow port forwarding. Super Circuits does not provide technical support for
router setup. Contact your service provider/router manufacturer for support on setting up port
forwarding. Use port number
8000 .
3. Do you have a dynamic or static IP address? Note: Static IP address is highly recommended,
because of the video connection reliability. Call your IP provider about setting up a static IP
address for your DVR.
4. Make sure you have DirectX version 9.0c on your computer. If not go to
www.microsoft.com/directx.
47