3
OPERATION
Plug the TA44T into a 120VAC outlet and verify that the display shows the current temperature
and the Alarm set point. If the display is not on, the TA44T is not receiving power and is not
operating. For continued protection, this requires immediate attention.
Locate the R10 in the desired location. Plug the TA44R into a 120VAC outlet and verify that
the power light is ON. Test the remote receiver audible alarm as outlined above in the
INSTALLATION AND REMOTE ALARM OPERATION
section.
Set the temperature alarm threshold to the temperature the TA44T must respond to, using the
Up and Down buttons. Typical values will be between 35 to 45 degrees for a refrigerator and 0
to 15 degrees for a freezer. The setting of this adjustment will depend on the type of protection
the TA44T is being used for and it is up to the judgment of the user to select an appropriate
alarm temperature.
TA44 Manual.indd 4
5/8/2012 4:39:16 PM
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
