SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR
_
S
KYPPER
FR
Page 15
Rescue parachute riser connection.
Installing the reserve parachutes.
Two rigid flaps are to be closed
on the inside of the Speedbag.
Close the two rigid flaps between
the stiffened panel and the neo-
prene lining.
Neoprene lining.
Inner rigid flaps.
Rigid internal
flaps.
Each Dyneema riser connects
to the harness via a Mail-
lon Rapides®, and is kept in
place with a toric joint.
Connecting the left, then
right reserve parachutes.
The risers are connected to
the same Maillons Rapides®
joining the right and left
reserve parachutes.
Connecting the left reserve parachute risers.
Connecting the right reserve parachute risers
over the left reserve parachute risers.
Left reserve
parachute risers.
Right reserve
parachute risers.
Once the installation
has been comple-
ted, gently pull on the
reserve parachute
handle to check and
validate the proper
extraction sequence (
POD + handle ). Repeat
installation procedure
afterward.
You can only install
one reserve parachute
to the right or the left
for a total of 2 para-
chutes between the two
containers.
