SUP’AIR manufactures its products in Europe. Most of the components used are Made in Europe.
S
UP’AIR
_
S
KYPPER
FR
Page 13
Reserve assembly
Thank you for carefully reading the following! We advise you to have
the initial rescue parachute installation done by someone knowled-
geable with the process.
Handle to POD connection.
1. Attach the handle to the POD central webbing passage and make a
loop to loop configuration.
2. Tighten the loop to loop connection, then check the overall integrity of
the assembly.
Connecting each of the 2 reserve parachutes
Dyneema riser sets with a loop to loop confi-
guration.
Reserve parachute pocket : characteristics
• 2 side pockets with 4 flaps. One to the right and one to the left,
symettrically located.
• Cable locking system.
• Volume : 3 to 8 liters.
• Compatible with the SUPAIR LIGHT or X-TRALITE reserve para-
chutes as well other solo models.
1
2
Connecting the Dyneema risers to the reserve parachute.
x2
The handle must be connected to
the central POD loop.
