SUP'AIR manufactures its products in Europe. Most of the components used are
Made in Europe
.
S
UP’AIR
_
A
CRO
3
Page 18
User’s manual ACRO 3
2.
Shoulder straps adjust-
ments.
Tighten the shoulder straps by pulling
cord « A » forward. Loosen by pulling
rearward on strap « B ».
Resting on the shoulder straps
contributes to the overall comfort level
and must be precisely adjusted ( not
too tight or too loose ).
b
a
3.
Adjusting the seating pos-
ture angle.
Adjust the seating posture angle by
using the trims located on each side
of the harness.
Tightening the adjustment ( raises the
knees height ) by pulling the « C »
buckle downward.
Loosen the adjustment by pulling
buckle « D » upward.
d
c
4.
Adjusting the chest strap or ventral strap.
Tighten the chest strap by pulling the green cord ( tightening the ventral
strap increases stability but heightens the risk of experiencing a « twist ».
Do not overtighten the chest strap adjustment.
Loosen the chest strap ( ventral strap ) by pulling on the black buckle « F »
( loosening the ventral strap will upset the harness's stability but provide
refined piloting opportunities ).
d
c
Adjusting the seating area.
1.
Backrest tilt adjustment.
Adjust the angle by puling the black
strap and bring the backrest closer to
a vertical setting, or on the green cord
to recline and pull away from the verti-
cal setting.
1
