SUP'AIR manufactures its products in Europe. Most of the components used are
Made in Europe
.
S
UP’AIR
_
A
CRO
3
Page 12
User’s manual ACRO 3
Accessories assembly
F
Installing the ventral ( front ) protection.
Ventral bridle schematic ( viewed facing the pilot ).
Main right hooking point.
Main left hooking point.
Towar
d the right shoulder str
ap.
Female right buckle
Female left buckle.
Saf
e-T str
ap
Towar
d the left shoulder str
ap.
Protection kit.
For better explanations in the following sche-
matic, the protections were colored in red.
B
A
1.
Installing part « A ».
Part « A » is attached to the chest strap,
and left side of the pilot.
A.
Push the female buckle
through the elasticated loop.
B.
Wrap and close the Velcro®
around the horizontal strap between
the main left attachment location and
the shoulder strap.
A. Elastic
B. Velcro®
2.
Installing part « B ».
Part « A » is attached to the chest
strap, and right side of the pilot.
C.
Wrap and close the Velcro®
around the horizontal strap on the
pilot's right side, behind the main at-
tachment location.
D
.
Wrap and close the Velcro®
around the horizontal strap between
the right shoulder strap and the ABS
strap.
C. Velcro®
D. Velcro®
ABS right str
ap.
Pilot's right side.
Pilot's left side.
3.
Closing the ventral ( chest strap ) strap.
Closing the buckles.
- Slide the part "B" excess in the elasticated loop found behind part "A" to tidy every-
thing up. As such, the protection will adapt itself to the chest strap.
( From the pilot's view point ).
